2013 Southern Regional Meeting
Proceedings
Click on the presentation titles to open a PDF file. Click here to open a PDF of the entire agenda.
General Session | Water Session | Environmental Session Part 1 | Wood Products Session | Air Session | Environmental Session Part 2 |Boiler MACT Session
Utilizing Advanced Analytical Techniques to Troubleshoot Biological
Wastewater Problems Workshop
- Beyond Growth Pressures
Mike Foster, Environmental Business Specialists, LLC; and Dr. Cliff Lange, Auburn University
- Bioaccumulation of Compounds in Pulp and Paper Biomass
Mike Foster, Environmental Business Specialists, LLC; and Dr. Cliff Lange, Auburn University
- Bioaccumulation of Compounds in Pulp and Paper Biomass continued
Mike Foster, Environmental Business Specialists, LLC; and Dr. Cliff Lange, Auburn University
- Welcome and Introduction
Jeremy Pearson, International Paper
- Environmental Issues and Challenges – Developments in Tennessee
Robert Martineau, Tennessee Department of Environment & Conservation
- Forest Service Research in Service to You
Dr. Rob Doudrick, U.S. Forest Service
- AF&PA Sustainability Initiative: Better Practices, Better Planet 2020
Jerry Schwartz, American Forest and Paper Association
- Zero Waste-to-Landfill – Is It For You?
Mark McNally, Honda Manufacturing of Alabama
- Climate Change Science Update
Dr. Craig Loehle, NCASI
- Climate Change and Environmental Sustainability Issues of Regional Interest
Reid Miner, NCASI
- NCASI Caribou Nutrition Research Program
Kirsten Vice, NCASI
Technical Session A – Water Quality Protection
- Regulatory Developments of Interest to the Forest Products Industry
Paul Wiegand, NCASI
- Applying Water Stewardship Initiatives in the Great Lakes Basin
Dale Phenicie, Environmental Affairs Consulting
- Recovery of Black Liquor Soap Skimmings in Kraft Pulp Mills
Joseph Bohannon, MWV
- Experiments to Determine Effects of Low Phosphorus Supplementation on
Pulp and Paper Industry Wastewaters
Jim Palumbo, NCASI
- Assessing the Effect of Retention Time Loss on ASBs
Robert Sackellares, Georgia-Pacific Corporation, and Jim Palumbo, NCASI
- Examining the Impact of Liquor Loss on Effluent Toxicity
Camille Flinders, NCASI
- Considerations in Setting Numeric Nutrient Criteria: Is the Patient Sick or Well?
Doug McLaughlin, NCASI
- Impact of Fish Consumption Rate on Water Quality Criteria – Recent Developments
Dr. Vickie Tatum, NCASI
Technical Session B – Environmental Issues Surrounding the use of Forests for Products and Energy
- The Tennessee Forest Sector: Status, Trends, Challenges, and Opportunities
Steve Owen, Resolute Forest Products
- Periphyton and Macroinvertebrate Responses to Ranges of Suspended and Bedded
Fine Sediment
Dr. Bob Danehy, NCASI
- Water Quality Effects of Herbicide Applications at the Alto Experimental Watersheds
in East Texas
Dr. Matthew McBroom, Stephen F. Austin State University
- Road and Skid Trail BMP Effectiveness Research at Virginia Tech
Dr. Chad Bolding, Virginia Tech
- Application of Water Quality Criteria to Forestry: Challenges and Considerations
Dr. Craig Loehle, NCASI
- Experiences with and Perspectives on the Shifting Regulatory Treatment of Forestry as a Point vs. Non-Point Source – Panel Discussion
Rob Olszewski, Plum Creek; Bob Ken Arney, U.S. Forest Service
- Forestry – Non-Point or Point Source – The Slippery Slope
Bob Emory, Weyerhaeuser Company
- NPDES Status-State Forestry Agency Perspective
John Colberg, Georgia Forestry Commission
Technical Session C – Wood Products
- Overview of the Current NCASI Wood Products Program
Rob Crawford, NCASI
- Current Issues and Methodologies for Determination of HAP Emissions from Wood Products Sources
Derek Sain, NCASI
- Boiler MACT Implementation – Panel Discussion
Denise Wlodyka, Masonite International Corporation; Phil Ferguson, Louisiana-Pacific Corporation; Rich Weber, Flakeboard America; Lawrence Otwell, Georgia-Pacific LLC; and Dr. David Word, NCASI
- Data Gathering to Assess CO Compliance Needs and Sample CO Emission Profiles at Wood
Products Facility Boilers
Dr. Arun Someshwar, NCASI, and Wayne Roberts, Weston Solutions, Inc.
- Developing Condensate Disposal Options for Continuous Lumber Drying Kilns
Forrest Denney, Georgia-Pacific Corporation
- VOC Testing of Direct-Fired Continuous Lumber Drying Kilns
Jeff Babb, Georgia Environmental Protection Division
- PM2.5 Measurement and Modeling Challenges
Lawrence Otwell, Georgia-Pacific LLC
Technical Session D – Air Quality Improvement
- Air Quality Regulatory Developments and Other Issues of Regional Interest
Dr. Vipin Varma, NCASI
- Modeling Challenges to Demonstrate Compliance with the New Ambient Air Quality Standards
Ryan Gesser, Environmental Resources Management
- Recent Data on PM 2.5 Emissions from Kraft Mill Sources
Lee Carlson, NCASI
- Do We Really Know What the Source PM 2.5 Emissions Are?
Ashok Jain, NCASI
- Operating Strategies in the Absence of SSM Exemptions
Dan Curry, TRC Environmental Corporation
- Major Source Permitting Experiences – Panel Discussion
Randy Taylor, URS Corporation
- PM2.5 Modeling for PSD
Colin McCall, All4 Inc.
- NO2 Dispersion Modeling Examples and Findings – Lessons Learned
Justin Fickas, Trinity Consultants
- Boiler MACT and Strategic Air Permitting
Mark Wenclawiak, All4 Inc.
Technical Session E – Environmental Issues Surrounding the use of Forests for Products and Energy
- Herpetofaunal Use of Ephemeral Aquatic Habitats in Managed Forest
Dr. Jessica Homyack, Weyerhaeuser Company
- Bird Response to Green Tree Retention in Loblolly Pine Forests
Dr. Steve Demarais, Mississippi State University
- A Survey of Industry Forest Herbicide Use and Application Patterns
Dr. Vickie Tatum, NCASI
- Estimation of Forest Conversion Rates from FIA and Remote Sensing Data
Dr. Paul Van Deusen, NCASI
- Factors Affecting Fuel Consumption and Harvesting Cost
Dr. Tom Gallagher, Auburn University
- Optimizing Roundwood Wet Storage: Reducing Water Application while Maintaining
Fiber Quality and Yield
Dr. Erik Schilling, NCASI
Technical Session F – Workshop on Implementation of Boiler MACT and CISWI Standards
- The Self-Determination of NHSMs as Non-Wastes
Dr. Vipin Varma, NCASI
- Control Technologies for MACT Compliance
Dr. Arun Someshwar, NCASI
- Considerations beyond MACT Compliance
Amy Marshall, URS Corporation
- NCASI Calculation Tool for Boiler MACT Output-Based Emission Limits
Ashok Jain, NCASI
- Designing Initial Performance Test (IPT) for Multi-fuel Boilers – Panel Discussion
Mike Curtis, Georgia-Pacific Corporation; Jim Taylor, MWV; Ginny Holton, Packaging Corporation of America; and Corey Brandt, RockTenn